Spring Style Shock for "The Angry Hornet"
Description
This is an alternative front landing shock designed by RonStG to fit "The Angry Hornet", instead of using rubber bands it uses a single extension spring in the front. Hardware needed for this build are: 3x 3mmx25mm screws 3x 3mm nylon lock nuts 1x spring 0.25in diameter x0.75 length x.031 diameter wire (McMaster-Carr #7749N084) 1x 3/16in x .0144in ID x 12 inch aluminum tube, cut to 14mm long (M-Carr #8978K112) Print settings .2mm layer height,.4mm walls, 2 walls, 25% grid infill 4 tops, 4 bottoms
Statistics
Likes
0
Downloads
1