OpenDTU Case with Display (SH1106)
Description
This is a case for the great <b>openDTU</b> project. I made two variants, one for the AZ-Delivery ESP32 and another one for a China ESP32 (which comes without the 4 holes) - check the pictures for the differences. As well there are two lids, one with the openDTU text, the otherone without You need: - 1 x ESP32 NodeMCU Module WLAN WiFi Dev Kit C Dev Board with CP2102 - 1 x 1,3 Inch OLED Display I2C SSH1106 Chip 128 x 64 Pixel I2C (white Text) - 1 x NRF24L01 + PA + LNA Radio-Transceiver-Module 2.4G with external Antenna - 1 x Power Adapter with 5V / 1 A and Micro-USB Connector - 4 x Ruthex M2 Thread Inserts - 4 x M2 Screws with countersunk head - 12 x Jumper wire cable (female to female) For wiring check out the attached image and be careful with the 5V and GND of the display - often times they are reversed and not in the order as shown on the image.
Statistics
Likes
0
Downloads
0