Mean Well LRS-350 Power Supply Cover
Description
This is a 3D printable cover for a Mean Well LRS-350 power supply. It is designed to hold a fused IEC 320 socket which can be wired to the power supply. There are 2 versions of the design: 1) Closed back version that completely surrounds the lower section of the power supply. 2) Open back version that allows the power supply to be mounted flush on the back face. To mount the cover to the power supply, the following non-3D printed parts are required: M4 x 8 socket head cap screw - qty: 2 M3 x 10 flat head cap screw - qty: 2 M3 Heat set insert - qty: 2 These are the M3 heat set inserts I used: https://www.mcmaster.com/94180A331/ CAD files for the power supply cover can be found here: https://grabcad.com/library/mean-well-lrs-350-power-supply-cover-1 Also check out my generic power supply cover design here: https://www.thingiverse.com/thing:5966973 Please do add acknowledgement if you use the CAD files. Thanks!
Statistics
Likes
0
Downloads
0