Generac 1-7/16" Flywheel Nut Socket
Description
A 36.7mm socket (approx 1-7/16") for turning the flywheel nut of a Generac standby generator to move pistons to "top dead center" for adjusting valve clearances. Ratchet hole size is for a 1/2" ratchet. Outside diameter of the socket just fits through the hole in the intake screen after the plastic intake baffle (behind the battery) and rubber center plug are removed. Should fit Generac 16kW-24kW air-cooled standby generators and perhaps others. SCAD file included if anyone needs to modify it.
Statistics
Likes
0
Downloads
0