nice!nano dongle with OLED port
Description
This is a case for a nice!nano to be used as a dongle. Has a port for an OLED screen. I've used some double sided tape to raise the switch up so it is pressed against the back cover as well as some tape behind the nano so there is some resistance to press a USB cable into the port. The button is a 6mm x 6mm microswitch. When installing, be careful not to apply too much pressure on the OLED screen, place it in with one side lined up against the bottom edge of the case, then apply pressure against the side with solder joints to force it into place. Take your time to make sure it is aligned well with the port. * [nice!nano](https://nicekeyboards.com/nice-nano/) * [OLED Module](https://keebd.com/products/0-91-lcd-oled-module-128x32) * [switches](https://www.amazon.com.au/gp/product/B0C27PL72M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Statistics
Likes
0
Downloads
0