BFPTouch modded for 25mm bolt
Description
__What is it?__ This is a modification to the BFP touch as I didn't have the required M3 30mm bolt, only a 25mm. The modified components are the main body and flag of the BFP touch to better accommodate a shorter 25mm M3 bolt. Additionally added a guide cut-out for heat inserting and additional M3 nut (optional, works fine without) into the flag (could also glue but take care not to get glue inside the nut). __What's included?__ Designed includes the modified parts, plus cover. If you want the additional printable servo horn, go to the original post: https://www.thingiverse.com/thing:2890290. __Recommended print settings__ __Recommended material:__ PETG or ABS, would work fine in PLA (I think) but might become brittle after a while. __Supports:__ Not required, but may improve print quality if used. __Bed adhesion:__ Assuming you are here because you don't have a bed levelling probe, I recommend using a raft, but its not required. __Wiring, assembly and programming__ Refer to original for instructions for wiring, assembly and programming: https://www.thingiverse.com/thing:2890290.
Statistics
Likes
0
Downloads
0