Ender 3 Push-in V-slot Covers (minimalist)
Description
As CR 6 SE and Ender 3 both use 2020 extrusions I remixed the profiles to test them on Ender 3. If printing multiple profiles at ounce better use a raft or brim, especially when selecting the finest resolution. Don't forget, measure twice, print ounce :-). Small lenght adjustment pre printing can be done via slicer (cf. scale, disable scale uniform!!). Ounce printed in PLA or PLA+ e.g. profiles can easily be shortened, cut to length with a knife. So, remixed in Fusion 360 and printed on CR6 SE. For Ender 3 Front bottom left: 135,5 mm x 2 Front bottom right: 135,5 mm x 2 Back bottom left: 135,5 mm x 2 Back bottom right: 135,5 mm x 2 Front side profile left outside: 2 x 200 mm Front side profile rigtht outside: 2 x 200 mm Front side upper profile: 2 x 165 mm No need to dissassemble, besides maybe the lcd to install bottom right profiles. . You can slide them underneath z stepper motor and PSU.
Statistics
Likes
0
Downloads
5