Nozzle holder M6x0.75
Description
I needed a nozzle holder for the oddball M6x0.75 nozzles that my CR10 max uses, so i designed this little holder/plate. I've modelled the threads and made them slightly over sized so that it should be possible to screw the nozzles in by hand in the first try. If the threads are a bit tight when there is room between the holes for a ¼" 8mm socket. I printed mine with 20% infill and 0.12 layer height with a 0.4 nozzle.
Statistics
Likes
0
Downloads
1