Creality K1 Max Side Filament Spool Holder Relocation
Description
This includes the spool holder and a back plate. The back plate is meant to be printed in TPU, so it does not scratch the plexiglass, but this is optional. Orange TPU is shown in the picture. The install required **3x m3-16mm bolts** to replace the shorter original bolts. Longer bolts will work as well. The STL file is designed for **EXACT measurements**. Due to the needed accuracy of the bolt locations, it must be printed to the exact measurement. That means, for instance, you may need to adjust the scale due to PLA shrinkage (usually 3%). In my case, I used Overture black PLA and it required printing at 103% to get the exact measurements. I suggest printing the backplate first to test fitment before printing the whole thing.
Statistics
Likes
0
Downloads
12