Tiki Dice Tower
Description
This was the very first thing I ever 3D designed, so please be gentle. I did use the tiki design from msraynsford (https://www.thingiverse.com/thing:24654) for the face of this tower. I have never printed this full size (150x100x45.2), because my first print of it was a test at 80% (120x80x36.16) that seemed to work perfectly and fit all of the dice that I own so I just stuck with it. I don't really remember any of my print settings for any of these, as many of them were printed a while ago and I have changed printing techniques several times since then. I have printed it in PLA, Wood PLA, PETG, and TPU and they all seem to work well. Two slightly different versions here. TikiTower5 has no scoop at the top, and the corresponding cover for it has clips to help keep it together during travel. TikiTower6 has the scoop at the top, and the corresponding cover has no clips. I suggest printing the tower upside down (on it's "head") for both versions, and you should only need supports on "TikiTower6" for the scoop at the top. The cover for both versions I suggest printing standing, and you will need supports for sure. Of course, these are all suggestions because we all print how we want to. If you find some other better ways to print them, please share with the class! Post your makes, too! PLEASE no sales of your makes. Don't forget to consider tipping if you enjoy this design, and if you are capable of doing so!
Statistics
Likes
0
Downloads
0