Napoleonic 28mm British Limber Team Generic
Description
28mm British Limber Team Generic 6 x different stances, horse with rider 6 x different stances, riderless horse 1 x carriage/limber If using a resin printer and you wish to show your appreciation, please send me a free copy of your print to the following address, but you are NOT obligated to do so: 25 Villager St, Cranbourne East, Victoria 3977, Australia I have posted some photos here as well. Please note that one limber is cast of lead, the other printed in my FDM printer. You can see the poor quality I produce from the FDM, but a resin printer should have no issue. I have included not supports for these. If you scrape out by turning, a little of the inside of the wheel, as per the photo, then the wheels should click into place which alleviates the use of glue. This works fine with my FDM and I see no reason why it won’t work with a resin. I WILL be uploading a lot more in the coming days, weeks, months, years, but unfortunately do not have too much time to allocate here. I shall be attempting to do ALL British at first. The lead figures cost around AU$42.00 to purchase, but the PLA print is around AU$0.98 [I assume RESIN in 2.5 times this] so even if you just want to print these as a temporary measure then that would probably serve you well. Thank you to those in advance who have sent me a free print of the figures, but again, you are under NO obligation to do so.
Statistics
Likes
0
Downloads
0