SecKit Cube CPAP Part Cooler
Description
You'll want to: - Use ABS filament or a filament that can be glued. -Use 15mm CPAP hose. -The CPAP hose is modeled in Fusion 360 as a CCW Coil with 6mm Pitch, 17.1mm Diameter, and a 2.5mm section size. This lets you screw the hose into the fitting and replace it if needed. - Convert the Bondtech/Bondtech Clone extruder to use M4 studs for the part cooler mount, but honestly you may want to just use a different cooler mine uses a custom-made brass nozzle from brass tubing...
Statistics
Likes
0
Downloads
0