Siccario Universal Camera Mount with FPV Cam
Description
A revised universal camera plate for Shendrone Siccario X8 Cinelifter. It extends the front part of the plate and incorporates 3 pairs of M3 countersunk holes to mount the FPV camera so that the FPV cam will be in line with the main camera during tilt angle adjustment. It also solves the jello issue from the original Siccario FPV cam mount. I have included the STEP files as well in case anyone wants to make a remix or adapt the design with other features. A couple of design notes: 1. There are 3 pairs of FPV cam mounting holes to choose from. When using a long lens for the main cam, you can use the frontmost holes so that the FPV view is not blocked by the lens 2. Be careful about cable management. Make sure not to pinch or bend the cable at too small bending radius when changing the tilt angle. 3. One slight disadvantage, the FPV camera will partially block the front space to access the 1/4 camera mounting screw. The solution is to use a taller Allen key to access from the front, or from the side when tightening the main camera screw. BOM: 1. Siccario Cam Plate (Carbon, 3mm thick), 1pc 2. 1 x PRINT Sicarrio FPV Cam Mount (TPU), 1pc 3*. 20cm Vista coaxial cable, 1pc 4. M3 x 23mm Aluminium Spacers, 2pcs 5. M3 x 8 Countersunk screws, 2pcs
Statistics
Likes
0
Downloads
0