18mm British Generic Cannon 6-9lb and Howitzer - Limber
Description
18mm British Limber Cannon Generic 1 x 6-9lb for RESIN and FDM 1x Howitzer for RESIN and FDM 1 x carriage/limber for RESIN and FDM WARNING: For those trying to print with FDM, PLA, the model, when placed in Cura, will need to be adjusted down until the detail on the underside of the wheels is non-existant, or you can use your own supports. Beware of the axel. Do as you will with the downloads, and if printing to sell then please leave a link to these FREE items for others to take advantage of. If using a resin printer, if you wish to show your appreciation, please send me a free copy of your print to the following address, but you are NOT obligated to do so: 25 Villager St, Cranbourne East, Victoria 3977, Australia The supports for the FDM saved STL can easily be removed in Nomad Sculpt, do as you think best, or simply apply your own. As you can see by one of the photos I made a cutting error in excitement and lobbed off a part of the model and a ‘linking chain’. This is easily avoidable. Enlarge the holes on the wheels with small knife, pointed modelling file, or your own method, to easily affix the wheel to the axel WITHOUT THE NEED FOR GLUE: but adding a little glue afterwards wouldn’t hurt. I WILL be uploading a lot more in the coming days, weeks, months, years, but unfortunately do not have too much time to allocate here. I shall be attempting to do ALL British at first. Thank you to those in advance who have sent me a free print of the figures, but again, you are under NO obligation to do so.
Statistics
Likes
0
Downloads
0