Ender 3 S1 Pro display mount revisited
Description
This is a complete remake of the original display mount by [Minus97](https://www.thingiverse.com/minus97/designs) with the added adjustable screwholes by [walklife](https://www.thingiverse.com/walklife/designs) and the extended base by [selinuahs](https://www.thingiverse.com/selinuahs/designs). <ul> <li>Removed the "PRO" branding and shaved the corner off so the piece blends in more and look like an integral part of the printer. <li>Reduced the height of the slide-on mechanism to save print time and filament. <li>Made 3 extra version with different angles to accomodate for different viewing angles, original one was the 50° version, the printed one on display here is the 60° Extra </ul> I recommend printing sideways (the way the STLs come) with tree supports. i have not personally tested the 50°, 40° and 30° but there is no reason they shouldn't work. The only difference is the angle of the display support.
Statistics
Likes
0
Downloads
0