Extruder BIQU H2 V2S + Volcano Hotend (or Lite) + BL Touch + ADXL345 Mount for Sidewinder X2
Description
All in one Mount Plate for Artillery Sidewinder X2 **Supports** - Extruder BIQU H2 V2S **with your Volcano Hotend** (or the proprietary Lite) - The volcano hotend should fit to H2 or H2 V2S with native V6 Hotend - H2 V2S Lite has nearly the same height, so it could also work (not tested) - I don't know if the water cooled H2 or the Revo Versions work or if the Volcano Hotend can be also mounted to the H2 V2S Lite - Antlabs BL Touch V3.1 - ADXL345 Mount for Sidewinder X2 - A 5015 Blower Fan (I use it with Sunon Maglev) **Features** - About 30% less weight then the stock titan extruder with volcano hotend - Less vibrations, higher speed - Great all Metal BIQU H2 DualGear extruder - Drop-In Replacement for native Artillery Sidewinder X2 - No further changes to the hardware - Maybe also X1, Genius Pro if they use the same backplate (not tested) - Reuse of Volcano Hotend (high flow) and Extruder Circuit - Perfect centralized fan ducts, No airflow reduction - FanDucts came from the back, so nothing disturbed your few to the nozzle tip. - In theory, the air stream hits the heating bed just under the tip of the nozzle - Mount adapter for ADXL345 Acceleration Sensor (Perfect resonance compensation with Klipper) - Mount Adapter for Antlabs BLTouch V3.1. This adapter is direct attached to the extruder, so for another type, someone can easily design another variant - Perfect centralized in front of the Nozzle (Offset X,Y: 0,-26) - Easy to Print (use heat stable material like ABS or ASA) **Known drawback** - Sorry I have to say I found no other way. You have to increase the cable length of the hotend heater or (more secure) buy a replacement with slightly longer cables. - If my decision to place the BL Touch direct in front of the nozzle, you have to design your own touch sensor adapter. Feel free to post it here! **Additional things** - M3 Screws - 3x M3x8 to mount on the Artillery backplate - 2x M3x8 to mount on the Artillery Circuit - 2x M3x8 to mount the BIQU H2 V2S Extruder - 2x M3x20 to mount the 5015 Blower Fan - 2x M3x6 for mount the BL Touch - 2x M3x6 for mount the ADXL345 - M3 Brass Threads: - 4x M3x4x5 for 5015 Blower + Artillery Circuit Board - 2x M3x4x5 for BL Touch Mount - M3 Spacer recommented Have fun. I would be very happy to see your makes of that! And feel free to comment. Like it? [](https://ko-fi.com/F2F7GC8PC) More information is coming
Statistics
Likes
0
Downloads
0