Pimoroni Automation Hat Mini Case for Pi Zero
Description
Simple "stack" case design for the Automation Hat Mini by Pimoroni I designed. I wanted something that was still lightweight but gave the setup enough protection to throw in my pocket and feel sturdy. You'll need: 1x Raspberry Pi Pico 1x Automation Hat Mini 4x M2.5 x 18mm 4x M2.4 Nuts Note: My local hardware store only had M2.5 in 20mm length, so I made a simple 2mm spacer instead of cutting the bolt to length. You may not need this if you use 18mm bolts
Statistics
Likes
0
Downloads
0