Spare Fuse Holder
Description
Heyho I recently installed some electronics to my friends van. To give him some spare fuses next to the electronic devices I designed this fuse holder. You can insert 1 x MEGA- Fuse (megaOTO) 3 x Midi- Fuse (midiOTO) 4 x Standard Car Fuses (normOTO) To mount the Holder to a wall I used two 3 x 20 mm screws. Additional you may use two M3 x 10 mm Screws to secure the midi- and mega Fuses. But I did not need to do that since they should not fall out of the holder. Note: If you have not the best tolerances with your printer you might want to scale the Model up about 2% so you don´t have trouble to load the fuses into the holder. But I didn´t test that yet since My holder works perfect as it is! Have fun and keep printin!
Statistics
Likes
0
Downloads
1