Suppressor holder / Silencer holder
Description
Holder for suppressor/silencer/can designed to be mounted in a gun safe/cabinet using magnets (neodymium 10mm in diameter and 8mm tall) or double-sided tape. If the cabinet or safe is pained with a slick paint, attaching a piece of thin rubber or cork to the back of the holder when mounted with magnets could be necessary for not having the holder slide down. Two models are shown here with one capable of comfortably holding suppressors with a diameter of 51mm and below and one for smaller suppressors with diameters of 36mm and below (both can be expanded slightly with sanding down the inner diameter of the top ring). Both models are 12 cm tall.
Statistics
Likes
0
Downloads
0