Throw lever for Leupold rifle scopes
Description
Throw lever designed to fit Leupold VX-3 and VX-iiiL scopes, however it most likely fits other Leupold scopes as well (scopes with a ≈ 37.7 mm zoom ring and the gas inlet notch). At full magnification, the throw lever has good clearance for both the high bent-back bolts such as a Winchester m70 as well as low straight bolts as found in the Winchester XPR. The throw lever is designed to be assembled using a 3 mm x 11 mm woodscrew. When printed with a wall thickness of 1.2 mm and 10 % infill, the throw lever is perfectly usable, however I printed mine with 100% infill for the extra durability.
Statistics
Likes
0
Downloads
0