Arduino PSA Diagnostics Tool Custom Case with OBD2 Port Socket
Description
This is a case designed to accommodate a 100% 3D printed ONDII socket developed by @brdesign, since he designed the socket itself, I made a custom socket adapter for it, + a case for Arduino and a MCP2515 module (either compact or entire board, this case is meant to accommodate all variants) plus wiring. To build, simply cut a few pieces of a rigid metal wire and using a pliers, insert it into the premade holes of the OBD2 socket, push them out about 1 cm (you can search online for a OBD2 socket for reference) and solder wire connections on the other end, then isolate everything, use hot glue to fix everything in place. The Socket adapter is fixed using a hex screw. For the Arduino box, 2 tabs have been designed to hold the board in place, use double-sided tape to stick it in the box, then on the other box half, attach the MCP2515 module, again, use hot glue to fix the wires in place, close both halves with two more hex screws and you`re done!
Statistics
Likes
0
Downloads
0