Sign of the Horns
Description
I still had flickering red LEDs lying around and decided to do something with them. Made a low poly version of the Sign of the Horns, original by Dietz1 here on thingiverse. The intention was to make a hollow version and then add the LED + battery and switch. Because hollowing out was not possible in the software I used, I decided to print with 0% infill and 4 perimeters. The screw holes for the M3 bolts are blind holes in the bottom of the model, the slicing method transformed these into tubes in which the bolts can be attached. I added a bottom cover that includes a cutout for a switch. As a battery I used 2 AA penlites that were placed in a standard holder. I attached the led to rigid electricity wires so that I could position them easily. Because the batteryholder was black, I wrapped it in white paper, so it would not shine through so much.
Statistics
Likes
0
Downloads
1