Silicone Spacer 11mm Cutting Jig
Description
The Anycubic Vyper uses 10.5mm plastic spacers to attached the build plate. These spacers don't allow for adjustment of the bed. Replacing these with silicone spacers adds the ability to make fine tune adjustments by compressing/decompressing to get the bed as close as possible to level as can be. The problem here is that the spacers only come around 16mm height which makes the firmware error out and not finish the leveling because it thinks the bed is too high. To alleviate this, the spacers need to be cut down. I designed this jig to help in making the cuts as accurate and repeatable as possible. All you need is a long razor like I have in the pictures. There is a hole in the back to allow the handle of a standard #11 Exacto blade to help remove the spacer after it's cut.
Statistics
Likes
0
Downloads
0