Octagonal Joystick Gate for Microcenter Universal Arcade - Control Kit
Description
This is an octagonal gate to replace the square gate that comes with the arcade stick kit. I used the parts to make mine into a fight stick, but found that with a square gate I was jumping when holding back a lot. The outer diameter is 58mm, and the screw holes are 45mm apart center to center. The gate diameter is 25mm. The thickness of the plate is 2mm. I am not sure of the long term durability of PLA at 2mm thick, but the original plate was closer to 4mm at least. At the moment it seems to work great.
Statistics
Likes
0
Downloads
0