Flight controller spacer mount for ZMR250
Description
Creates A Spacer With An Insulator Between Layers On The 32Mm Holes Where You Mount A Flight Controller Or A 4-In-1 Esc On A Zmr250 Or Similar Frame. Use Nylon Screws And Nuts To Hold It Down. In Particular, I Made These For My Frame So That I Could Stack A Cc3D Flight Controller Onto A 4-In-1 Esc And Make Sure Neither Touched The Other. There'S An "H" And A Square Shape To Work Around Components And Plugs That Stick Out. Use Whichever Shape Fits Better. I Included The Openscad Files For People To Customize To Work Around Electronics On Their Flight Controller Or Esc. Added Two More Stand-Offs That I Used. One Is For A Readytoflyquads.Com 4-In-1 Esc And The Other Is For A Flip32+. The "Outside Square" One Tries To Make A Picture-Frame Like Spacer To Work Around Components. I Put These On My New Zmr250 With The 4-In-1 Esc And The Flip32 And The Stack Looks Tight And The Wiring Is Minimal. I Really Like It.
Statistics
Likes
25
Downloads
0