Extruder Cover Artillary Genius PRO + 5015 Fan Mod
Description
### Modificaciones realizadas ##### "Extruder Cover X2 / Genius PRO + 5015 Fan Mod" - Rejilla de ventilación - Orificios de los tornillos son de 2,7mm para que no sea necesario usar tuercas - Orificios de los tornillos del ventilador desplazados para poder usar tornillos de 16mm ##### "Herberts_Mod_Bauteillüfter_V5.stl" from "Just-Printed_3D" (https://www.thingiverse.com/thing:4799645) - Conducto interno desplazados para distribuir el flujo de aire ##### "5015 fan cover" - Orificios de los tornillos del ventilador desplazados para poder usar tornillos de 16mm y que no roce en la cama ### Soportes - Solo para "Air_duc_GeniusPro.stl" ### Masterial utilizado - 7 tornillos M3 longitud 16mm - Ventilador 5015 24v ### NOTAS: Es posible que esta cubierta del extrusor no quepa en Sidewinder X1 o Genius (sin pro). Solamente probado en Genius Pro. --- ### Changes made ##### "Extruder Cover X2 / Genius PRO + 5015 Fan Mod" - Ventilation grill - Screw holes are 2.7mm so it is not necessary to use nuts - Fan bolt holes offset to accommodate 16mm bolts ##### "Herberts_Mod_Bauteillüfter_V5.stl" from "Just-Printed_3D" (https://www.thingiverse.com/thing:4799645) - Internal duct displaced to distribute the air flow ##### "5015 fan cover" - Fan screw holes offset to use 16mm screws and not rub against the bed ### Supports - Only for "Air_duc_GeniusPro.stl" ### Material used - 7 M3 screws length 16mm - Fan 5015 24v ### NOTES: This extruder cover may not fit Sidewinder X1 or Genius (no pro). Only tested on Genius Pro.
Statistics
Likes
0
Downloads
0