Tomy Intruder Wing Mount Set
Description
Wing mount set for the Tomy Intruder / Intruder EX buggies. Parts for this buggy are becoming increasingly difficult to find. This is a slightly modified version of the wing mount to make it a little more easier to print and still have an appearance like the original. I have changed the wing mount bases from using a body clip to screw style. You will need an appropriately sized washer and a M3 bolt (M3x8). The body clip style feature likely would not have been strong enough if printed with FDM (except if it was printed with a stiffer TPU or Nylon). This will allow for more readily available options. Additionally, this may help keep the original style wings in place with less rattle when using more extreme angles. NOTE: I have not yet printed this and mounted it up. This design has been simplified versus the original (I removed some of the undercuts in the mount area and on the wing mount bases); but it should mount up similarly. I have designed this for use with M3 machine screws not the original self-tappers. I did adjust some of the thicknesses but it should match pretty closely with the original. I would not recommend mixing/matching with an OEM piece.
Statistics
Likes
0
Downloads
0