Vallejo Paint Stands
Description
I made these purely out of personal needs as I wanted something small rather than a large rack as I only use a handful of colours at a time. Perhaps you might find them useful so I thought I would share. I also made them to fit on a small Resin printer, the 8 x 17ml holder is the maximum for Anycubic Photon Mono 2. **Rotate in your slicer so that it sits fully flat** No need for any infill or supports, if prompted for supports when slicing select NO - Print on bed. There are 3 different ones to choose from, I found the 8 x 17ml with 9 x brush holders the most useful, I made the brush holder size a sloppy fit so I could use different brushes. I have made the depth deep enough for vertical mounting also, I added screw holes in the 8 x 17ml version but you can drill the others if you wish. Share and share alike, but please don't sell.
Statistics
Likes
0
Downloads
0