GANTRY MOUNTED PART COOLING DUCT FOR ENDER 3 PRO
Description
This thing is a duct for mounting three 5015 blowers on the x-axis gantry of an Ender 3 Pro. I used six #8-32 x 1" long flat head socket cap screws and #8-32 brass nylock nuts to mount the fans to the duct and standard M4 T Slide Nuts for 20-20 aluminum extrusion with M4 x 10mm long socket head cap screws to mount the duct assembly to the gantry. I wired the three 5015 fans in parallel with the part cooling fan so they turn on and run at the same percentage as the part cooling fan. These are the blower fans it was designed around: https://www.amazon.com/WINSINN-Cooling-50x50x15mm-Extruder-Makerbot/dp/B079BPS9Q8?th=1 T-slide M4 nuts: https://www.amazon.com/KOOTANS-Fastener-Sliding-Aluminum-Extrusion/dp/B07PMM7C44/ref=sr_1_1_sspa?keywords=m4%2Bt%2Bslide%2Bhammer%2Bnuts&qid=1692646884&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Statistics
Likes
0
Downloads
3