Turntable for Raspberry Pi Zero (1 and 2)
Description
Turntable for raspberry pi zero (1 and 2). Can be used to trigger camera. Can be used upside down with threaded rod (M5) attached. You will need these parts: Raspberry pi Zero (1 or 2) + sd card 50 mm. Swivel plate: https://www.aliexpress.com/item/1005005161261696.html?spm=a2g0o.detail.0.0.32a4VcLmVcLmvE&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40000.327270.0&scm_id=1007.40000.327270.0&scm-url=1007.40000.327270.0&pvid=9cd91645-5cae-46e6-bde1-8b0ea0081c7b&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40000.327270.0,pvid:9cd91645-5cae-46e6-bde1-8b0ea0081c7b,tpp_buckets:668%232846%238108%231977&pdp_npi=4%40dis%21SEK%2117.48%2113.98%21%21%211.55%21%21%402103010f16926121457117138ea407%2112000031925923960%21rec%21SE%21129135134%21#nav-specification Stepper motor + stepper driver: https://www.aliexpress.com/item/1005001543466717.html?spm=a2g0o.productlist.main.23.46439d7064dgAc&algo_pvid=278188b1-77de-4360-9b3f-4c06a197a8c0&algo_exp_id=278188b1-77de-4360-9b3f-4c06a197a8c0-11&pdp_npi=4%40dis%21SEK%2182.12%2164.03%21%21%217.31%21%21%40211b88f016927246462562629e1df6%2112000016519418816%21sea%21SE%21129135134%21&curPageLogUid=XNcZKhPLWHrs 5 mm LED (optional) https://www.aliexpress.com/item/32731407139.html?spm=a2g0o.productlist.main.21.5a044f52t3B4Nt&algo_pvid=532ccbba-0a16-4174-8251-e6dff2be3462&algo_exp_id=532ccbba-0a16-4174-8251-e6dff2be3462-10&pdp_npi=4%40dis%21SEK%2112.81%2111.35%21%21%211.14%21%21%40211b88f016927247023355928e1dfd%2112000029313383884%21sea%21SE%21129135134%21&curPageLogUid=gYIyLYSNv53m Resistor 330 ohm - 1k ohm (optional) https://www.aliexpress.com/item/1005003117726705.html?spm=a2g0o.productlist.main.27.6ad14bf8pwqJCo&algo_pvid=c3bdaa94-dfe6-4028-8d36-13f9d61d4d6b&algo_exp_id=c3bdaa94-dfe6-4028-8d36-13f9d61d4d6b-13&pdp_npi=4%40dis%21SEK%2134.60%2132.58%21%21%213.08%21%21%4021038ed816927247872143615ed583%2112000024192658375%21sea%21SE%21129135134%21&curPageLogUid=2NrmPPKKc0eD M4 screws and nuts M3 screws screws for raspberry pi (M3 can be used but the holes need to be expanded). I will provide complete spec for all the screws later. Disclaimer: I did not have cad model of the swivel plate. Might need to make adjustment when it arrives..
Statistics
Likes
0
Downloads
1