Sony 70-350mm Lens Collar
Description
IMPORTANT!! PRINT AND USE AT YOUR OWN RISK!! Please understand that this is a cheap piece of plastic that will be used to hold at least 1k worth of equipment. Use at your own risk. I saw that lens collars for this specific lens are about $50, so I made my own. This is designed for a Sony E 70-350mm f/4.5-6.3 G camera lens. The 'tripod quick shoe' mount was designed with a Fotopro tripod in mind, but the screw hole on the bottom is just a standard 1/4-20 thread, so it might be able to fit others. The whole thing is tightened by a 1/4" replacement knob I found at Lowe's, which is linked below. You will need some washers as well, I linked the ones I used. Don't tighten the ring to tight btw :)
Statistics
Likes
0
Downloads
0