Nerf Roughcut Speed Loader Mk.1
Description
This is a speed loader designed for the Nerf Roughcut 2x4. The speed loader is assembled by jamming the smaller of the two parts (the Pusher) into the larger one (the Block). The tabs on the pusher must point in the direction that the holes open to on the block. The pieces should be facing the correct direction in relation to each other in the print file. To operate, ensure that the pusher is placed at the back of the block. Load the block with eight darts and store it for later. When you need to quickly reload your roughcut, align the block with the front part of the Roughcut, and pull the tabs towards you. This should load all eight darts into the blaster. Note: I currently lack access to a 3D printer, so this print is untested. I recommend printing on an infill setting of 5-15% to test the viability of the print before going all-out. Please let me know if you found this print successful or, if not, tell me how it failed. Thank you!
Statistics
Likes
0
Downloads
0