Ubiquity AI 360 Adapter for Hikvision Corner Mount bracket
Description
<p>Since Ubiquity's AI 360 does not support corner mounting out of the box, and I didn't fancy doubling up on cameras to get the desired coverage, I found a suitable Hikvision wall mount bracket that solves half the problem, however an adapter was needed to bridge the two.</p> <h2>Prerequisites</h2> To achieve the same result as on the photos you must have a - Ubiquity AI 360 camera - <a href="https://connectec.uk/security/cctv/cctv-accessories/cctv-camera-brackets/hikvision-ds-1473zj-155-wall-mount-bracket-for-dome-camera">Hikvision DS-1473ZJ-155 Wall Mount Bracket for Dome Camera</a> - <a href="https://connectec.uk/security/cctv/cctv-accessories/cctv-camera-brackets/hikvision-ds-1602zj-corner-ptz-mount-bracket">Hikvision DS-1602ZJ/CORNER PTZ Mount Bracket</a> *** *** The DS-1602ZJ was only used for its corner mount bracket. You may opt for a generic one that has a large enough plate, however I found this worked best. Only 2 holes would line up so I decided to drill 4 new, close to the existing ones, to keep it centered. Other options I trialled with were either too small or were full of holes. Overall, happy with the result. It could be improved on by designing a dome that mounts onto the Hikvision DS-1602ZJ and the AI360, that would reduce any overhead with assembling, and keep the parts list to a minimum, however that will have to wait for some time...
Statistics
Likes
0
Downloads
1