Ikea Skadis Filament holder / Filamenthalter
Description
This filament holder was designed to match the Ikea Skadis pin board. 5 rolls fit next to each other on the large pin board. The structure was planned with ball bearings of the type 6903 with the dimensions 17x30x7mm. Simply press the bearings onto the axles and hang in the axles. The filament spool can be placed on the axles and unrolled. If the coil is damaged, it can also be hung on an axis as shown in the picture. 0.2mm layer thickness 50% infill Dieser Filamenthalter wurde passend zur Ikea Skadis Pinwand konstruiert. An die große Pinwand passen 5 Rollen nebeneinander. Geplant wurde der Aufbau mit Kugellagern vom Typ 6903 mit den Maßen 17x30x7mm. Einfach die Lager auf die Achsen drücken und die Achsen einhängen. Die Filament Spule kann auf die Achsen gestellt werden und abrollen. Sollte die Spule beschädigt sein kann sie aber auch auf einer Achse aufgehangen werden wie auf dem Bild zu sehen. 0,2mm Schichtdicke 50% Infill
Statistics
Likes
0
Downloads
0