Monthly Pill Organiser (Individual Sliders)
Description
I modified this design so that it has individual lids for each space. If you print 4 lids, you can slide them up and down to open up the different spaces. You can start with all 4 lids at the top and with an empty row of spaces at the bottom, then slide one lid down each day to reveal the next space. I think that this design makes it more usable since the lids are self-contained and don't stick out when you slide them up. The trade-off is that you only have 4 usable rows instead of 5, since you need an empty row to slide the lids into at the start. I personally printed this at 120% scale, but you can choose your own scale that fits your needs. --------------------------------------------- ORIGINAL SUMMARY: With this pill organiser you're able to store and organise up to 35 days of pills. The wells in this are designed to be larger to hold bigger and/or more medications. This is inspired by https://www.thingiverse.com/thing:758586 but built from the ground up myself. All credit for the idea goes to LoboCNC. I needed to make a new version of it for myself as the original one was hilariously small for the pills I take every day. Each compartment is 18mm wide, 18mm deep, and 24mm long. The whole thing overall is 145mm W x 160mm L x 21mm D You will need to print 2 each of the S lid and T lid, then one each of everything else. This has been designed with 0.35mm clearance. Print Settings Printer: Artillery/Evnovo Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: honestly anything is fine
Statistics
Likes
0
Downloads
0