2nd gen 4unner visor part
Description
this is a part for 2nd gen 89-95' 4runner's visor. it works for both sides this will use the existing hardware from the stock visor, needing the spring, lock washer, and screws. it will take some manhandling to get the spring and lock washer off. you can print in pla but if you live somewhere that gets unusually hot i recommend using something with more heat resistance like petg if possible (my warped pieces still work fine but i wouldn't suggest it) this will be my first upload so i hope it helps you all. thank you
Statistics
Likes
0
Downloads
1