TNTBA Anti-Vibration Feet v1.0 for BambuLab x1 Carbon, P1P & P1S
Description
** UPDATE 8/24/2023 - IMPORTANT INFORMATION** This design will not hold the weight of an X1 Carbon and AMS system. The Clips will fail! I am currently working on version which will support the weight of the X1C and AMS for those of you who like to stack them! *Thanks to @happywafflemonkey on YouTube for bringing this to my attention and providing me with his findings!!! * UPDATE: 8/30/2023 - Version 2.0 is out. https://cults3d.com/en/3d-model/tool/tntba-anti-vibration-feet-2-0-for-bambulab-x1-carbon-ams-p1p-p1s These are anti-vibration feet I created to improve on the design made by BambuLab. https://youtu.be/g_AvrIsSZhM Holy crap guys. This was most difficult thing I've ever designed. The goal was to design something that was as good, or better, than the $10.00 Anti-Vibration Feet sold by BambuLab. After 10 different designs, I finally settled on this one. No glue, screws, or anything is needed to put this together. They're all snap in. :) I tested these feet against the antivibration feet by BambuLab and they are actually slightly BETTER than BambuLab's version! Watch my YouTube video to see how I tested the design and the results. They do not affect print quality of prints. They help reduce the amount of vibration transferred to the surface your printer is on. Enjoy! -Erik
Statistics
Likes
0
Downloads
0