Metal-look Carving - Hueforge Print
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Matte PLA+ Brown PLA+ Grey PLA+ Gold PLA White Swap Instructions: Start with Black Matte At layer #17 (1.44mm) swap to Brown At layer #19 (1.6mm) swap to Grey At layer #22 (1.84mm) swap to Gold At layer #27 (2.24mm) swap to White for the rest. Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Statistics
Likes
0
Downloads
1