Tilt Motor Mount 10° for Nighthawk frame (updated)

Description

Those Motor Mounts Are Specifically Tuned For Emax Nighthawk Frame. They Have Following Characteristics: * 10Deg Forward Tilt * All Screw Holes Are For M3 * Size And Screw Holes Are Adjusted For 22-Width Motors * Allow Use Normal Motor Screws To Bolt Motors On The Mounts * Needs 4X M3 Screws And Nuts To Install The Mount Onto Legs Tested Successfully On: * Emax Nighthawk Pro All Carbon Frame * Emax 2204 2300Kv Motors --- Update 27.06.2015: **Updated Model Does Not Have Inward Angle Anymore**. As I Found Out During Testing That This Caused Unstable Yaw In Cleanflight. When Doing Tight Turns - More Than 90Deg - It Overshot Badly And I Could Not Fix It With Different Pid Controllers Or Parameters. Now With Straight-Front Tilt The Problem Is Gone. You Can Use The Previous Ones To Test Its Specific Characteristics But I Based On My Experience I Cannot Recommend The Design. Now The Design Consist Of 2 Slightly Different Pieces - One For Cw Another For Ccw Motor.

Statistics

Category

Tags