Qidi i-mate s liquid cooled conversion
Description
The carriage assembly is designed to work with the creality brand bl-touch and "amazon" nf watercooled hot end assembly, as well as the stock ducted cooler and belt compression plate that comes with the qidi i-mate s. There will soon be files for an air duct for the plenum ducted from the workpiece fan. It is recommended that when printing this that you align the fan backplate to be parallel with the xy-plane, and the TPU plenum plugs are an exact fit, so at 100% infill they are very VERY tight. Lower infill should yield a better fitting part.
Statistics
Likes
0
Downloads
0