Crowtail Capacitive Moisture Sensor V2.0 case
Description
Four (4) enumerated cases for Elcrow Crowtail-Capacitive Moisture V2.0/V2.1 sensors. These cases are better fitting and don't need any extra trimming with a blade to fit the board inside. You'll need a total of 16 M3x8mm screws with countersunk heads (4 per case), and there's no need for counter nuts. The cable hole is about 4 mm wide, so it fits custom cables snugly. I recommend using the included .gcode file because it has support structures for the parts, so you don't have to worry about extra work around the screw holes. I used a custom cable that I soldered right into the circuit of the moisture sensor.
Statistics
Likes
0
Downloads
0