TI Rigid Heddle Loom Mk. I
Description
I created this rigid heddle loom because the one that I had previously updated actually somehow hit 1000 views- a kind thank you goes out to everyone supporting my work! My previous weaving loom included 2 heddles with mechanically defined positions, meaning you can only weave repeatably with 2 strands, making the patterning less easy to change. So, this fully 3D Printed loom was created for weavers who might value creative freedom and simplicity more over repeatability- no more heddles! You will most likely need a 3D Printer with a bed size of atleast 220mm x 220mm to be able to comfortably print this weaving loom, with the effective weaving width being 196mm. The included heddle is about ~7epi. I use 6-32"x1/2" machine nuts and bolts to bolt the 2 top connectors to the two frame pieces; the dimensional call out for the insert on the nuts is 8mm from side to side. You should be able to use different nuts and bolts as long as the heads and nuts are not smaller than 4mm across. 6-32" hardware is also used to mount the Ratchet Stoppers onto the frame pieces. Printed parts list: 1x Left-sided Frame 1x Right-sided Frame 1x Heddle 2x Top Frame Connector 2x Warp Load Bar 2x Warp Roller Bearing 4x Roller Bearing Ratchet 4x Roller Bearing Ratchet Stopper Included printed tools: 6-32" Wrench Shuttle Tool Warp Load Tool Warp Board Mk. I
Statistics
Likes
0
Downloads
0