Desktop Vise
Description
Heavy duty desktop clamp vise with interchangeable grips. The vise can rotate for more convenience. The larger parts can all be printed at 0.2 just fine. The rest I highly recommend printing at a lower layer height especially the 2 bolts and screw. The pivot ball will need to be printed at 0.12 or lower. Files Desktop_Vise_Base_Top_Body and Desktop_Vise_Arm will need to be glued with epoxy. This design is guaranteed to work down to 50% size though the bottom plate bolt may be a bit tight.
Statistics
Likes
0
Downloads
0