Lasercut Prusa Iteration 2 Thick Sheet
Description
Explanation of the Prusa's thick sheet is here: http://reprap.org/wiki/Thick_Sheet This design has a few improvements: <ol><li>-Support for Prusa Iteration 2's single thick sheet design.</li> <li>-There are holes for belt clamps, lm8uu bushings, and Prusa's heated bed.</li> <li>-Holes in the middle of the thick sheet to reduce weight.</li> <li>-The edges of the holes are rounded to prevent stress from concentrating in small areas.</li> </ol> The design could be improved by adding holes to mount something for opto endstops and slots for LM8UU holder zip ties. Update: I adjusted position and size of the holes for the belt clamp (so the belt can be shorter), heated build plate (was a tight fit in original), and LM8UU holes (so no print area is lost).</li> Update 03/14: Corrected position of the belt clamp holes due to NikkeiRonin's suggestion. Added version for 3 lm8uu bushings like NikkeiRonin's thing. </ol>
Statistics
Likes
12
Downloads
1980