Kangaroos (Macropus Rufus) - Hueforge Print
Description
The red kangaroo Macropus rufus illustrated by Charles Dessalines D Orbigny. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Siddament Black Transmission Distance: 0.2 PLA+ Sunlu Brown Transmission Distance: 1.8 PLA+ Sunlu Coffee Transmission Distance: 3 PLA META Sunlu White Transmission Distance: 9.6 Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Brown At layer #17 (1.44mm) swap to Coffee At layer #21 (1.76mm) swap to White for the rest. Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Statistics
Likes
1
Downloads
31