Candle Mold
Description
After printing your mold, insert the wick into its joint, tighten the two pieces of the mold (with the help of a bench vise or clamps), and pour the melted wax. After a few hours (when the wax is solid) your new candle will be ready. I didn't use any type of lubricant, the wax came off the piece very easily. To help you detach the two molds from each other, you can help yourself with a screwdriver by inserting it in the 2 holes on the side. I tried printing this in PLA and it held up to temperatures, i recommend a fairly high filling. Candle Diameter: 6cm
Statistics
Likes
0
Downloads
10