Destiny 2 - Crimson Exotic Hand cannon
Description
My print of Crimson! Please note: the model pictured was the prototype, which had many issues i attempted to correct in the 3MF file, though, I have not printed the "Final" version here, so there MAY be unforeseen problems, though it shouldn't be anything a little sanding can't fix. The only outside hardware needed should be a M3 screw and nut, roughly in the range of 19mm long if possible...though this could easily be modified, again, I haven't personally printed the final edition yet, so clearances may be off a little. Make sure to print 16 spikes as well as multiple "bullets" for the chamber. As this is a 3MF format and not STL, you can open this into a application such as 3D builder (a free to download app from microsoft), which allows you to view the entire thing in its "assembled" form, and see exactly how everything fits together for easy assembly. I did my best to make this as support free as possible, though some pieces were just too annoying, such as the Hammer on the back.
Statistics
Likes
3
Downloads
21