Joystick panel mount / bezel for "PS2" joystick modules
Description
These are panel mounting adapters for a common type of small joystick PCB module, generally sold as PS/2 or PS2 joysticks or thumbsticks. As bought, those modules are not simple to attach to a panel, as the only mountings are four holes in the PCB at the back - which is also offset from the joystick centre. (The ones I got came in a bag branded "DollaTek"). This mount adapter is designed to fit a 30mm hole, and be used with four 3mm screws to attach it to the panel. The joystick module attaches separately to the rear of the adapter using ~2mm screws. There are three versions included, to suit different size thumb stick levers that can be used with these modules: The _2p one is sized to fit the black plastic stick they come with. The _2m version has a smaller inner radius, to suit a nicer looking replacement aluminium stick section you can use on these, that's available on ebay etc. The _2a is an intermediate radius, in case there are other stick replacements in between those two!
Statistics
Likes
0
Downloads
1