Configurable Dupont Holder with Clip
Description
With this SCAD file you can create a cable holder for dupont or other cables you need. Use https://openscad.org/ or https://www.thingiverse.com/apps/customizer/run?thing_id=6209818 to modify this project Here are the parameters you can modify: display_connector = 1; // 1 = create connector, 0 = hide connector display_clip = 0; // 1 = create clip for connector, 0 = hide clip for connector positions = [1,1,1,0,0,1,1,1]; // Define here the pins (1 = space for Dupont or other connector, 0 = Dummy Spacer) total_height = 13.5; // Define the total height of the holder connector_height = 12; // Define the height of the connector connector_width = 2.6; // Define the width of the connector connector_depth = 2.6; // Define the depth of the connector cable_radius = 1.05; // Define the radius of the hole for cable border_thickness = 3; // Define the left and right border thickness back_thickness = 1.5; // Define the thickness of the back border front_thickness = 1.5; // Define the thickness of the front border
Statistics
Likes
1
Downloads
5