2-Gang Decora Light Switch Extender
Description
A 2-gang decora light switch and fan switch extender for young and small children. Print: * 1x Face Plate * 2x Arm * 2x Toggle * 2x Screw Provide: * 4x #6-32x1/2" wall plate screws I also included a Thread Test that is the interface portion of the arm, so you can check to see if you need to modify X/Y scaling on the screw. Arm slots into the hole of the toggle from behind, and is then secured with the screw from the front. These toggle assemblies will then fit into the grooves in the back of the face plate. Remove screws from existing wall plate, but keep the plate - the printed plate gets installed over the existing one. Use the longer screws to affix the plate and toggles to the existing plate.
Statistics
Likes
0
Downloads
2